A polyurethane fortified alkyd high gloss finish for exterior and interior use, with excellent durability, gloss and colour retention containing phenolics and polyurethane resins. The product has easy application and good hiding power. Dries to a mar and print resistant highly washable and slip resistant finish. Contains tempered safety granules.

Intended Uses

A slip-resistant coating to protect interior and exterior floors of wood, metal or masonry. (Primer may be required depending on substrates - See below.)

Surface Preparations

Cement Floors (Raw): Apply two coats of product directly.

Previously Painted Surfaces: Surface must be clean dry, sound and free from loose paint etc. Remove grease and wax by washing with mineral spirits. Glossy surfaces should be dulled by sanding. For priming apply Alkyd undercoat where surface is porous.

Metal: Remove all loose rust and mill scale by wire brush, sand blasting or wheel abrading, as required. Make sure surface is clean from grease etc. Use red or white metal primer.

New Wood: Seal knots and problem surfaces with wood and knot sealer before painting. Shellac or Stain Blocker recommended. Use Alkyd undercoat or latex primer.

Masonry Surfaces: (Plaster, Cement, Concrete, etc.) All surfaces must be allowed to cure fully before painting. Smooth concrete floors should be roughened. Remove all loose chalk etc. from old masonry surfaces before painting. Use Latex primer for priming surface.